SOLVED Unable to connect to WMI (root\ccm) on remote "machinename" machine error = 0x8004100e

[Harshit Pandey]

Hi, just installed sccm and client agents unable to install. help needed.

ccm.log file

---> Connected to administrative share on machine machinename using account 'domain\user'
---> Attempting to make IPC connection to share <\\machinename\IPC$>
---> Searching for SMSClientInstall.* under '\\machinename\admin$\' SMS_CLIENT_CONFIG_MANAGER
---> System OS version string "10.0.15063" converted to 10.00 SMS_CLIENT_CONFIG_MANAGER
---> Unable to connect to WMI (root\ccm) on remote machine "machinename", error = 0x8004100e.


ccmsetup.log file :-


Failed to get DP locations as the expected version from MP 'machine'. Error 0x87d00215
Failed to get client version for sending state messages. Error 0x8004100e
[] Params to send '5.0.8498.1008 Deployment Error: 0x0,
Sending Fallback Status Point message to 'machine name', STATEID='101'
<ClientDeploymentMessage ErrorCode="0"><Client Baseline="1" BaselineCookie="" Platform="2" Langs=""/></ClientDeploymentMessage> ccmsetup 6/4/2017 7:58:18 PM 960 (0x03C0)
State message with TopicType 800 and TopicId {DD896EEA-F63A-4B7F-987B-5F4E2F60D51B} has been sent to the FSP FSPStateMessage 6/4/2017 7:58:18 PM 960 (0x03C0)
Next retry in 10 minute(s)... ccmsetup
ccmsetup is shutting down ccmsetup
Shutdown has been requested ccmsetup
Failed to connect to policy namespace. Error 0x8004100e ccmsetup
Failed to revoke client upgrade local policy. Error 0x8004100e ccmsetup
Failed to get client version for sending state messages. Error 0x8004100e

 

[Prajwal Desai]

Are boundaries and boundary groups in place ?. Ensure File And Printer Sharing and WMI is opened on the clients Firewall to allow the client push to work correctly. Check this link -http://prajwaldesai.com/configuring-firewall-settings-for-configuration-manager-2012-r2/

 

[Harshit Pandey]

Thanks for the quick reply. I will check and get back to you.

 

[Harshit Pandey]

Boundaries were there but they were not configured correctly. After recreating and attaching distribution point to boundary it started working.