Hello,
I'm struggling with SCCM Client installation push to install/upgrade clients in DMZ. With SCCM CB environment, from Primary site to MP/DP in DMZ.
I set up the DMZ boundaries, and enable the CPI (with an account that has local admin on the clients) , check the CCM.log but nothing happened.
I right-click on a discovered machine CLIENTX02 and "install client" then I saw movement in CCM.log :
---> Created service "ccmsetup" on machine "CLIENTX02". SMS_CLIENT_CONFIG_MANAGER 2019-05-30 2:27:49 PM 9208 (0x23F8)
---> Started service "ccmsetup" on machine "CLIENTX02". SMS_CLIENT_CONFIG_MANAGER 2019-05-30 2:27:49 PM 9208 (0x23F8)
---> Deleting SMS Client Install Lock File '\\CLIENTX02\admin$\SMSClientInstall.PR1' SMS_CLIENT_CONFIG_MANAGER 2019-05-30 2:27:49 PM 9208 (0x23F8)
on the CLIENTX02, the CCMSETUP.log is there but I see the following errors and nothing get installed (see attached log)
the MP/DP are :
SERVER02.Mydomain.Contoso.CA
SERVER03.Mydomain.Contoso.CA
DMZSERVER01.DMZdomain.Contoso.CA
but because of FW rules only the DP/MP (DMZSERVER01) in the DMZ should be accessible for my DMZ client CLIENTX02
Can you please help me with this issue?
Thanks in Advance
I'm struggling with SCCM Client installation push to install/upgrade clients in DMZ. With SCCM CB environment, from Primary site to MP/DP in DMZ.
I set up the DMZ boundaries, and enable the CPI (with an account that has local admin on the clients) , check the CCM.log but nothing happened.
I right-click on a discovered machine CLIENTX02 and "install client" then I saw movement in CCM.log :
---> Created service "ccmsetup" on machine "CLIENTX02". SMS_CLIENT_CONFIG_MANAGER 2019-05-30 2:27:49 PM 9208 (0x23F8)
---> Started service "ccmsetup" on machine "CLIENTX02". SMS_CLIENT_CONFIG_MANAGER 2019-05-30 2:27:49 PM 9208 (0x23F8)
---> Deleting SMS Client Install Lock File '\\CLIENTX02\admin$\SMSClientInstall.PR1' SMS_CLIENT_CONFIG_MANAGER 2019-05-30 2:27:49 PM 9208 (0x23F8)
on the CLIENTX02, the CCMSETUP.log is there but I see the following errors and nothing get installed (see attached log)
the MP/DP are :
SERVER02.Mydomain.Contoso.CA
SERVER03.Mydomain.Contoso.CA
DMZSERVER01.DMZdomain.Contoso.CA
but because of FW rules only the DP/MP (DMZSERVER01) in the DMZ should be accessible for my DMZ client CLIENTX02
Can you please help me with this issue?
Thanks in Advance