PENDING SCCM and WDS in a different server

[ALim]

Hi,
Currently, my SCCM provides Software deployment and Windows Updates for an endpoint. WDS on another server provides PXE boot for the endpoint for image cloning. (third-party cloning).
I want to use SCCM to capture images and as well deployment images to an endpoint. Hence, I want the endpoint to get pxe boot service from WDS and image deployment from SCCM.
I have Enabled "PXE support for clients" in the DP on the WDS. At the DHCP, option 066 points to WDS and 067 is boot\x64\wdsmgfw.efi (this is the current setting)
But once I enabled the "PXE support for clients" in the DP on the WDS, the endpoint could not get any pxe service from WDS.
Do I miss any steps? Or should I shutdown the WDS server and install the WDS service on the SCCM server?
Please advise, thank you

 

[Prajwal Desai]

If you have enabled PXE support on the DP and multicast feature, the WDS should be installed on the DP.

 

[ALim]

Do I need to change the 066 and 067 settings on the DHCP server?

 

[GSTERLING]

Do I need to change the 066 and 067 settings on the DHCP server?

Recommend you switch to IP Helpers instead of DHCP options

Boot from a PXE server on a different network - Configuration Manager

This article describes how to boot from a PXE server on a different network.

learn.microsoft.com

 

[ALim]

It is working now. The PXE client is getting the boot file from the SCCM. There are no changes on the 066 and 067.
Thank you for the input

 

[prashant@95]

It is working now. The PXE client is getting the boot file from the SCCM. There are no changes on the 066 and 067.
Thank you for the input

Same issue we are facing in our company could you please guide how you have fixed the issue .