SOLVED WDS issues boot image not booting

[gangaskan]

below is the error i've been seeing in SMSPXE.

Client Boot TS reply: <ClientIDReply><Identification Unknown="0" DuplicateSMBIOS="0" DuplicateMACAddress="0" ItemKey="16777261" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SCCMPXE 7/2/2021 2:25:42 PM 9588 (0x2574)
PXE: F8:B1:56:B7:8E:CF: There are NO Task Sequence deployments for this client machine. Aborting the request. SCCMPXE 7/2/2021 2:25:42 PM 9588 (0x2574)
PXE: F8:B1:56:B7:8E:CF: Sending ABORT. SCCMPXE 7/2/2021 2:25:42 PM 9588 (0x2574)


a little background: had huge issues with WDS and PXE booting, during this time i kept doing the uninstall role, reboot, etc.. and eventually everything worked itself out. this week a co worker goes to image a machine (tested with multipule) and we started having issues responding. to the point where i removed all boot images, reinstalled pxe again, and now i'm getting above in smspxe.log i dont really see any errors, but i have both x86 and x64 boot images deployed to the server.

 

[Prajwal Desai]

PXE: F8:B1:56:B7:8E:CF: There are NO Task Sequence deployments for this client machine. Aborting the request - Have you verified if the Mac address is that of the machine that you are PXE booting ?. Is the TS deployed correctly and are there any machines with duplicate entries in DB. I have dealt with this error recently and there is no easy solution to this. But I will help you with this.

 

[gangaskan]

well Prajwal, i took a step back and tried to make sure i have had everything done proper and saw more errors at one point, googling around i referenced back to a post here, but i think i broke pxe even more :/

steps i have done
1.) remove PXE
2.) check if wds is removed, then reboot
3.) removed boot images from SCCM
4.)delete %windir%\temp
5.) check to see if remote install is present
6.) reinstall pxe, create boot images, fix dhcp to reflect package(do i even need to do that?), but now i'm getting TFTP: 10.5.1.110: cannot open smsboot\COL002D5\x64\wdsnbp.com. (COL002D5 is deployed)

edit: also, looking in the SMS_xxx share i dont see the package in bin/x64/SMSBoot
edit 2: referencing a different known old pacakge that was not removed i can pxe however i get the following
RequestMPKeyInformation: Send() failed. SCCMPXE 7/6/2021 2:32:40 PM 5384 (0x1508)
PXE: 34:17:EB7:39:AB: Unsuccessful in getting MP key information. 0x80004005. SCCMPXE 7/6/2021 2:32:40 PM 5384 (0x1508)
PXE::MP::InitializeTransport failed; 0x80004005 SCCMPXE 7/6/2021 2:32:40 PM 5384 (0x1508)
PXE::MP::IsKnownMachine failed; 0x80070490 SCCMPXE 7/6/2021 2:32:40 PM 5384 (0x1508)


which brought me back to this part of the post.

 

[gangaskan]

update:

i figured out where i went wrong in my pxe boot issues, i fixed everything and back to the original issue of no task sequence available.

one thing i do notice is when i try to copy a task and deploy it all i see in deployment setting where it says make available to the following: i see only configmgr clients and its greyed out, can not edit it.

 

[gangaskan]

sorry for the constant updates but i'm getting slightly further

Packet: Operation: 1 (request), AdrType: 1, AdrLen: 6, HopCount: 0, TransactID: 0001e240, BootTime: 65535, Addr: 34:17:eb:d7:39:ab:00:00:00:00:00:00:00:00:00:00, HostName: , BootFile: , ClientIP: 192.168.10.125, HostIP: 0.0.0.0, ServerIP: 10.1.1.102, RelayIP: 0.0.0.0
Options:
93, 2, Arch: 00 07
97, 17, UUID: 00 44 45 4c 4c 4a 00 10 4e 80 30 c3 c0 4f 4e 32 32
53, 1, MsgType: 03, request
60, 9, ClassID: PXEClient
55, 9, ParamRequestList: 3c 80 81 82 83 84 85 86 87
250, 15, Extension: 0c 01 00 0d 02 08 00 01 02 00 07 0e 01 00 ff SCCMPXE 7/7/2021 9:21:58 AM 3948 (0x0F6C)
PXE: Packet from 192.168.10.125 (PXE, 00:50:56:9E:9A:70, 10.1.1.102). SCCMPXE 7/7/2021 9:21:58 AM 3948 (0x0F6C)
PXE: 34:17:EB7:39:AB: Operation=1, MessageType=3, Architecture=7, Continuation=1 SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)
PXE: 34:17:EB7:39:AB: Parsed a request (continuation) packet. SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)
PXE: 34:17:EB7:39:AB: 4C4C4544-004A-4E10-8030-C3C04F4E3232: Client is 64-bit, UEFI, WDS. SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)
PXE: 34:17:EB7:39:AB: Prioritizing local Management Point http://Systemcenter.domain.org. SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)
PXE: 34:17:EB7:39:AB: Using Management Point: http://Systemcenter.domain.org SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)
Not in SSL. SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)
RequestMPKeyInformation: Send() failed. SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)
PXE: 34:17:EB7:39:AB: Unsuccessful in getting MP key information. 0x80004005. SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)
PXE::MP::InitializeTransport failed; 0x80004005 SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)
PXE::MP::IsKnownMachine failed; 0x80070490 SCCMPXE 7/7/2021 9:21:58 AM 3632 (0x0E30)

 

[gangaskan]

you can go ahead and mark it solved! figured out that PXE::MP::IsKnownMachine failed; 0x80070490 meant something about the DP cert. changed the expiration date to generate a new cert and everything is rocking and rolling!

just need to add boot drivers for nic/storage and add a second boot image in with one particular image.