PENDING SCCM OSD NOT WORKING ON MULTIPLE SUBNET

[Rohit]

Hello All,

I have two IP range in network. I am able to do OSD on one subnets IP range only. But the machines on second subnet are fail to do so. After booting it shows error code 0x0000000f on screen. I have made configuration in DHCP Scope as well as i have checked boundaries configuration all is good. But it is getting fail. Please help me on this issue.

 

[Edy]

You need IP helper on the networking side.

 

[Prajwal Desai]

Ensure the clients can communicate to the DP + if you still see the error, use this guide - https://www.prajwaldesai.com/sccm-error-code-0xc000000f-boot-configuration-data-missing/