SOLVED Installation of SCCM agent failed with error code 0x87d00227

[VaclavH]

Hi guys, I need your help, I am not able to install sccm agent, always fails with error code 0x87d00227

see this:

Failed to persist AAD on-boarding info. Error 0x87d00227 ccmsetup 11.09.2019 11:18:22 3484 (0x0D9C)
Retrieved site version '5.00.8740.1002' from AD for site 'PRI' ccmsetup 11.09.2019 11:18:22 3484 (0x0D9C)
SiteCode: PRI ccmsetup 11.09.2019 11:18:22 3484 (0x0D9C)
SiteVersion: 5.00.8740.1002 ccmsetup 11.09.2019 11:18:22 3484 (0x0D9C)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11.09.2019 11:18:22 3484 (0x0D9C)
No MPs were specified from commandline or the mobileclient.tcf. ccmsetup 11.09.2019 11:18:22 3484 (0x0D9C)
Updating MDM_ConfigSetting.ClientDeploymentErrorCode with value 2147749907 ccmsetup 11.09.2019 11:18:22 7680 (0x1E00)
OS is not Win10RS3+, ENDOK. ccmsetup 11.09.2019 11:18:22 7680 (0x1E00)

What was checked:
- wmi - ok
- boundaries - ok
- ports (firewall etc..) - ok
- network - ok

So any advice about how to proceed with the installation? Basically I have two option how to install agent, like locally (preferred) and remotely, this one issue happened during local installation (remote installation is getting the same issue as well)

Thank you for your help guys

 

[Sam Banford]

I believe that error code is "Functionallity Disabled". Might be that the client system is set to use a metered connection. Check the following in the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DusmSvc\Profiles\
If any of the adapters are set to metered they will appear under the profiles key and have a property named "UserCost" with a non-0 value. Set it to 0, restart the DusmSvc service (Data Usage) and try to deploy the SCCM client again.

If that solves it then you have to decide wether or not you want to allow SCCM client communication on metered connections. This setting is found:
Administration > Client Settings > Default Client Settings (or some other custom one you're using) > Metered Internet Connections
Change it from the default "Block" to "Allow".

If you don't have metering then you need to figure out why that system is thinking it is.

 

[n.sammohung]

Worked like a charm, Thanks

 

[Sam Banford]

No prob.

 

[Lokesh T Jeevanantham]

It works fine by changing the "UserCost" value as '0', after that CM client installation gets worked.

 

[rajpal singh]

HI Team I m unable to install sccm client on local system manually also .local system log file is attached pls help