PENDING ConfigMgr Application stuck at 0% downloading

[Jeneration Me]

I packaged up O365 as an application and have deployed it to several machines with no issues. However, yesterday afternoon I keep getting it stuck at 0% on every computer on only one DP. Last week it worked on that DP but not anymore. I've removed and recreated the application and even tried a different application. I made sure that things are as they should be on the DP and with the deployment settings.
I deployed a smaller application last week and it went to all machines without any issue.
Here are some log entries:
DataTransferService.log
Successfully queued event on HTTP/HTTPS failure for server 'SACSCCMP1.hotwater.aosmith.org'. DataTransferService 8/15/2019 1:14:23 PM 7292 (0x1C7C)
Error sending DAV request. HTTP code 404, status 'Not Found' DataTransferService 8/15/2019 1:14:23 PM 7292 (0x1C7C)
Download timeout has met. DTS job {F9EFCB5C-37B3-4306-9E92-0F8FC65B84F8} will quit. DataTransferService 8/15/2019 1:14:23 PM 7292 (0x1C7C)
GetDirectoryList_HTTP('http://SACSCCMP1.hotwater.aosmith.o...ontent_7d405df1-e814-418c-a803-05690c5ceb43.1') failed with code 0x800705b4. DataTransferService 8/15/2019 1:14:23 PM 7292 (0x1C7C)
Error retrieving manifest (0x800705b4). DataTransferService 8/15/2019 1:14:23 PM 7292 (0x1C7C)

AppDiscovery.log
+++ Did not detect app deployment type Office 365 Default Deployment Type(ScopeId_09ACC22D-58C4-48CF-B34D-20C347785FF2/DeploymentType_15233554-a910-425c-983e-b852eb16383d, revision 3) for system. AppDiscovery 8/15/2019 12:58:02 PM 4612 (0x1204)


I've attached some of the relevant logs. Any help would be great!

 

[Garth]

0x800705b4 = This operation returned because the timeout period expired.

so check firewalls, network connections, etc. .

 

[Jeneration Me]

I need to ask others about that. Is there more specific information I can ask them about?

 

[Garth]

no, not based solely on that error message.

 

[Edy]

is the content in the DP? can you try updating the content to DP again?

 

[Jeneration Me]

I have deleted, removed and recreated the package a few times. It's only this one package. We have no firewall and it's from a Distribution Point that resides on the same gateway as all the clients. BITS is set high and there is no other throttling on the network.

I'm really stuck here. Any ideas on what logs I can look at on the DP to see if it's communicating with the clients?

 

[Edy]

Check locationservices.log to tell you which site/boundary the client is connected to.

 

[Edy]

and make sure the package in the dp and the right boundary

 

[Jeneration Me]

DP And boundary were good. Looks like it was out of drive space. Ugh. Distmgr.log on the server got me to where I needed to be. I need to do my homework on these logs.

 

[Edy]

how could the DP be good (green) if it was out of space? everytime you distribute content, make sure you check the content status and they are all green.