SOLVED After Imaging from Stock. Cannot re-image. Lenovo T470's

[Johnny_SCCM]

Hello all. Having a strange issue with re-imaging Lenovo T470s' with our Win 10 Image after initial imaging. When I image from stock it works with no issues. However, when re-imaging again it fails into the post OS after the "Start PXE over IPV4"step. It seems to fail loading the boot.wim. I tested our other models - T460s and X1 Carbon and I can reimage fine. I've removed the device from SCCM and ADUC with the same results. I've checked and our BIOS settings with secure boot and TPM are correct.

 

[Prajwal Desai]

At what step is it exactly failing ?. Did you look into smsts.log file once ?.

 

[Johnny_SCCM]

Thanks, Prajwal! It fails right before the boot.wim even loads. It hasn't gotten to the step of creating the smstslog file or the X drive yet from what I can see.

 

[Edy]

you have the right Network Driver in the boot image?

 

[Johnny_SCCM]

Hi Edy,

Yes, I am able to initially get our image on it from stock. It's on re-imaging with our inag again that it fails at IPV4

 

[Edy]

just wanting to check what will happen if you disable secure boot and set to legacy? would you still get an IP from DHCP?

if you dont then you might want to check the network driver on your boot image again.

is your TS deployed to All Unknown Computers? have you deleted the computer from sccm?

 

[Johnny_SCCM]

The model has been removed from stock as obsolete. Resolved.