SOLVED Adding Computers from Another Domain

[AleksaCvijanovic]

I need to add computers that are in a different domain using a single IP range. The goal is to ensure these devices are properly recognized and managed within MECM.
Could you please advise on the best approach to configure this setup? Do I need to make any specific network or boundary group adjustments, or is there another recommended method?
Attached picture is ip range from that domain, I have allowed all required ports, but the computers from the other domain are still not visible in MECM.
Thank you for your help!

 

[Garth]

I need to add computers that are in a different domain using a single IP range. The goal is to ensure these devices are properly recognized and managed within MECM.
Could you please advise on the best approach to configure this setup? Do I need to make any specific network or boundary group adjustments, or is there another recommended method?
Attached picture is ip range from that domain, I have allowed all required ports, but the computers from the other domain are still not visible in MECM.
Thank you for your help!

Did you add discovery for the new domain? Add boundaries will not help until that is done.

 

[AleksaCvijanovic]

Did you add discovery for the new domain?

No.. Which discovery method should i use?

 

[Garth]

No.. Which discovery method should i use?

AD System Discovery.

 

[AleksaCvijanovic]

AD System Discovery.

Then i just add another domain to active directory container and thats it?

 

[Garth]

Then i just add another domain to active directory container and thats it?

pretty much.

 

[AleksaCvijanovic]

pretty much.

Thank you so much Garth! Everything works now!