PENDING SCCM PXE Boot from DHCP not working

[lalajee2018]

Hi,

Issue I got is that we move our DHCP scope to new DHCP server and none of the PXE setting was transfer. the dhcp server is decommission so i dont know what was setup on the old dhcp server

I have configure our dhcp server with following settings

43 = 010400000000FF
66 = IP address of the PXE Server
67 = SMSBoot\x64\Wdsmgfw.efi

On most machine its working but some machine

1. downloads the PXE image and then hangs on an black screen (nothing happens)
2. Boots into pxe and then restart the system again
3. Boots into pxe apply OS and then gives error

Is they any other option I need to configure to make the PXE work

We are using SCCM 2103 on Server 2012 R2
I cant use IP Helper at the moment to do this, so please dont recommend it

 

[Prajwal Desai]

Was this boot image working earlier?. I see the DHCP is working because the PXE client can download the boot image. Try reconfiguring the PXE role-but I feel the issue is somewhere else.

 

[lalajee2018]

Was this boot image working earlier?. I see the DHCP is working because the PXE client can download the boot image. Try reconfiguring the PXE role-but I feel the issue is somewhere else.

As far as i know it was working but since it move its not been like same.

The issue we are seeing is only happening on new models which we brought.

I have try following for new model.

Create new Boot image
Upload Drivers and added into new boot image (Network and Storage)
Copy old TS and apply new custom boot image
But still i see same issue