SOLVED Unsuccessful in getting MP key information 0x80004005

[gangaskan]

starting to get frustrated, this seems to be 100% of my issues with SCCM

Packet: Operation: 1 (request), AdrType: 1, AdrLen: 6, HopCount: 0, TransactID: f78f3a6a, BootTime: 65535, Addr: 64:00:6a:3a:8f:f7:00:00:00:00:00:00:00:00:00:00, HostName: , BootFile: , ClientIP: 10.8.1.27, HostIP: 0.0.0.0, ServerIP: 0.0.0.0, RelayIP: 0.0.0.0
Options:
53, 1, MsgType: 03, request
60, 9, ClassID: PXEClient
97, 17, UUID: 00 44 45 4c 4c 54 00 10 33 80 30 ca c0 4f 31 38 32
93, 2, Arch: 00 00
55, 11, ParamRequestList: 03 01 3c 80 81 82 83 84 85 86 87 SCCMPXE 11/15/2021 2:02:14 PM 3752 (0x0EA8)
PXE: Packet from 10.8.1.27 (PXE, 00:50:56:9E:9A:70, 10.1.1.102). SCCMPXE 11/15/2021 2:02:14 PM 3752 (0x0EA8)
PXE: 64:00:6A:3A:8F:F7: Operation=1, MessageType=3, Architecture=0, Continuation=0 SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)
PXE: 64:00:6A:3A:8F:F7: Parsed a request packet. SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)
PXE: 64:00:6A:3A:8F:F7: 4C4C4544-0054-3310-8030-CAC04F313832: Client is 32-bit, BIOS, Firmware. SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)
PXE: 64:00:6A:3A:8F:F7: Prioritizing local Management Point http://systemcenter.domain.local. SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)
PXE: 64:00:6A:3A:8F:F7: Using Management Point: http://systemcenter.domain.local SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)
Not in SSL. SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)
RequestMPKeyInformation: Send() failed. SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)
PXE: 64:00:6A:3A:8F:F7: Unsuccessful in getting MP key information. 0x80004005. SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)
PXE::MP::InitializeTransport failed; 0x80004005 SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)
PXE::MP::IsKnownMachine failed; 0x80070490 SCCMPXE 11/15/2021 2:02:14 PM 11008 (0x2B00)


things i have done

uninstalled pxe role
remove boot images and removed the boot images folder
reboot
reinstall role after ensuring WDS is removed -- using no pxe responder without WDS
add boot images, tick the deploy boot image from the pxe enabled DP change the package in DHCP and all the above happens.


edit: also, bootimages folder gets added into %windir%\temp but no files inside.

 

[gangaskan]

go ahead and close this


i was getting kernel security errors, at this point i did a full checkdisk, and sfc /scnanow

come in this monring and found it working. dont know why, but i got drivers to add now!