SOLVED SCCM 1806 PXE Help

[harveybham]

Hi All,

We are using SCCM 1806 but pxe is not working at the moment.

From what i have been reading, version 1806 has the option to do pxe boot without the need for a wds server. This is something that we are trying to setup

My network team has used IP helpers for this and i have ticked the box in the distribution point. When i attempt pxe on a device it is not getting a dhcp address at all.

My question is do i need to specify any dhcp options for this to work or is this method supposed to work without the need for this?

Thanks

 

[Prajwal Desai]

Do you have multiple VLAN's in your setup ?.

For testing - Configure DHCP options 66,67 and check if the PXE client picks up boot image.

 

[harveybham]

Hi, We do have multiple VLANS here.

I will test 66 and 67 and see if it picks up boot image

 

[Prajwal Desai]

If you have multiple VLAN's then IP helpers should do the job. Anyways let me know how the testing goes.

 

[harveybham]

with multiple vlans and iphelpers and the option ticked on the dp would there not be the need for the 66 and 67 then ?

 

[Prajwal Desai]

Using DHCP options you direct PXE clients to an appropriate NBP to download. Configuring IP Helpers on your network will allow you to point to the WDS server directly.

 

[harveybham]

Hi, I have manged to get this to work . There was a patch that was missing from the sccm server which i installed. I can now pxe. I can not pxe from another Vlan but that is a network issue for my network team. This can be marked as resolved

Thanks