SOLVED PXE Boot \ could not find boot image ABC00123

[karl_009]

Hello,
Am hoping someone can help..

I unticked the option "Deploy this boot image from the PXE-enabled DP" on an old boot image in this case ABC0123, the new boot images are present and are deployed both the 32\64 bit versions with the option "Deploy this boot image from the PXE-enabled DP" ticked but it still looks for the old one..
I can see in the logs it find the new boot images...

I have unticked all the options on the PXE setup for the DP so it will setup again but no luck.

Any ideas..
Thanks

 

[Prajwal Desai]

By any chance are you pointing the old boot image under DHCP options?. Also check if the new boot image is referenced under TS Advanced properties.

 

[karl_009]

Hi,
Thanks for the feedback, I checked this and that was not the case..
What I found to be the issue is the old boot image was still on the DP, I had to remove it from the DP I was using to do the PXE boot, once removed the correct boot image took over and I was able to successfully boot using PXE.

Thanks