PENDING OSD Fails

[Oscar Maseko]

Hi,

Can you please assist? I am trying to deploy windows 7 images using SCCM P1

When I PXE boot I get the following error: The file is possibly corrupt. The file header checksum does not match the computer checksum.
BOOTMGR image is corrupt. The system cannot boot. Press any key to reboot.

Regards
Oscar

 

[Prajwal Desai]

Looks like you have had a problem while updating the boot image & now the boot image is corrupt. If you want to re-generate the boot images then you could try the below steps.

1. Install Windows Assessment and Deployment Toolkit (ADK) for Windows 8 via Microsoft Download Center
2. Optional: Install Microsoft Deployment Toolkit 2012 with System Center Configuration Manager 2012 Integration via Microsoft Download Center
3. Reboot DP Server
4. Run Deployment and Imaging Environment (Windows ADK) as Administrator
5. Re-Create Boot Images via COPYPE.CMD

COPYPE.CMD x86 c:\WINPE86

COPYPE.CMD amd64 c:\WINPE64

COPYPE.CMD arm c:\WINPEARM

1. Extract boot.wim from ..\sources\ Folder and copy to SCCM DP-Share
2. Integrate boot files from share into SCCM
3. Check boot packages properties and enable "Distribute on PXE DP" on "source" Tab.

 

[Oscar Maseko]

Looks like you have had a problem while updating the boot image & now the boot image is corrupt. If you want to re-generate the boot images then you could try the below steps.

1. Install Windows Assessment and Deployment Toolkit (ADK) for Windows 8 via Microsoft Download Center
2. Optional: Install Microsoft Deployment Toolkit 2012 with System Center Configuration Manager 2012 Integration via Microsoft Download Center
3. Reboot DP Server
4. Run Deployment and Imaging Environment (Windows ADK) as Administrator
5. Re-Create Boot Images via COPYPE.CMD

COPYPE.CMD x86 c:\WINPE86

COPYPE.CMD amd64 c:\WINPE64

COPYPE.CMD arm c:\WINPEARM

1. Extract boot.wim from ..\sources\ Folder and copy to SCCM DP-Share
2. Integrate boot files from share into SCCM
3. Check boot packages properties and enable "Distribute on PXE DP" on "source" Tab.

I've actually done this, I got the info from this site.
http://www.systemcentercentral.com/...e-from-adk-with-sccm-2012-sp1-r2-sccm-sysctr/