PENDING Failed to run task sequence error: 0x80004005

[Vaibhav Shah]

Hi,

I have started receiving failed to run task sequence error 0x80004005 in my sccm 1702 environment. After looking into smsts.log I have noticed that client was not connecting with MP. I have tried by restarting IIS and server. I have also reinstall MP role with no luck.

Can nay one suggest me what could be the problem and respective solution for it?

Thanks in advance. Find attached smsts.log file.

 

[Prajwal Desai]

Can you attach the log file ?.

 

[Vaibhav Shah]

The log file was already attached. I am doing it again.

 

[Prajwal Desai]

Hi Vaibhav, i am unable to see the log files or any attachment, that's why i asked to upload. Can you a zip file, add the log file and then upload ?.

 

[Vaibhav Shah]

Sorry about that. I am attaching zip file here.

 

[Prajwal Desai]

failed to request for client
SyncTimeWithMP() failed. 80004005. TSMBootstrap
Failed to get time information from MP: http://..

Check this post - https://prajwaldesai.com/sccm-task-sequence-error-0x80004005-while-retrieving-policy/

 

[Vaibhav Shah]

failed to request for client
SyncTimeWithMP() failed. 80004005. TSMBootstrap
Failed to get time information from MP: http://..

Check this post - https://prajwaldesai.com/sccm-task-sequence-error-0x80004005-while-retrieving-policy/

Hi Prjwal,
I have already checked all these blogs before reporting here. Also, I have an issue with all new machines I am trying. I have checked on three different laptops and all have the same issue.

 

[Prajwal Desai]

How about this thread - https://prajwaldesai.com/community/...-policy-when-pxe-booting-with-sccm-2012.1231/
Log files won't lie and I also see "QueryMPLocator: no valid MP locations are received". Check boundary and boundary group configuration as well.

 

[Vaibhav Shah]

How about this thread - https://prajwaldesai.com/community/...-policy-when-pxe-booting-with-sccm-2012.1231/
Log files won't lie and I also see "QueryMPLocator: no valid MP locations are received". Check boundary and boundary group configuration as well.

Hi Prajwal,

I have gone through this and checked my boundaries they are all set. Find the attached screenshots. My client is getting IP 10.10.160.x ip which is covered under boundary i can ping my MP from client machine.

 

[Vaibhav Shah]

will this make any difference?

 

[Prajwal Desai]

will this make any difference?

Nope that a role and can be uninstalled and installed back.

 

[Prajwal Desai]

Hi Prajwal,

I have gone through this and checked my boundaries they are all set. Find the attached screenshots. My client is getting IP 10.10.160.x ip which is covered under boundary i can ping my MP from client machine.

What's the subnet mask and is that supplied correctly ?. Try creating IP address range and check if that works.

 

[Vaibhav Shah]

What's the subnet mask and is that supplied correctly ?. Try creating IP address range and check if that works.

subnet mask 10.10.0.0 and it is supplied correctly in the boundary and this was working a week ago. I have created a new IP range boundary with 10.10.160.100 to 10.10.160.150.

I am not sure what else i have to configure/change so that pxe client will pick ip from this boundary. Please guide.

 

[Prajwal Desai]

If you have created a new IP range 10.10.160.100 - 10.10.160.150, created a boundary group and assigned a valid DP and then if the client machine gets an IP address 10.10.160.x by DHCP server, the client should talk to the DP and download the boot image.

 

[Vaibhav Shah]

If you have created a new IP range 10.10.160.100 - 10.10.160.150, created a boundary group and assigned a valid DP and then if the client machine gets an IP address 10.10.160.x by DHCP server, the client should talk to the DP and download the boot image.

Well I modified the existing boundary which was on IP subnet to IP range and gave this IP range, however, my client machine still gets IP out of that range (within the subnet) and I can ping my sccm server. And keep getting the same error.

 

[Vaibhav Shah]

Hi

I did fix this issue but end up with another. The OSD task now failing at OSD computer name. and seeing some of the errors in the smsts log. Please find attached log and see if you have come across the similar issue.

 

[Prajwal Desai]

Are you running a custom frontend script to specify computer name ?. If yes recheck this script once.

Could not find CCM install folder. Don't use ccmerrors.dll
Failed to run the action: OSD Computer Name.
Unknown error (Error: FFFFFFFF; Source: Unknown)

 

[Vaibhav Shah]

I am checking the script. I Don't get the second part about ccmerrors.dll.