Welcome to the forums. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your topics and posts, as well as connect with other members through your own private inbox!
Good day,
We have recently moved our on premise environment up to Azure and have noticed that due to latency, patching and imaging are not working as it should. Also we are getting charged every time we image our machines or send out updates or packages. My thought was to build a DP on...
Hi Folks,
is there a Way to change this Value for all existing DPs?
The Parameter Set-CMDistributionPoint -MinimumFreeSpaceMB don't exist anymore
We are using Build 2403
Thanks in Advance
We've had a disaster (NVME on a Esxi failed and lead to most of the vms stopped working) on one of our offices (where we had a distribution point).
We have Veeam backup solution and we've recover the machine on another disk and it powers on perfectly but when we try to deploy via pxe it give us...
I build new DP and set it up for pre-stage content but packages are not mark as successfully even after i run the pre-stage command
On remote DP I have copy all of the pre-stage packages and run following command for each package
ExtractContent.exe /f /P:X:\Prestage\Content\xxx28.pkgx
When I...
We have an existing AD environment with one AD site. We have multiple physical locations connected by a WAN. Each location has a different IP subnet.
We currently have one DP. All subnets currently belong to the primary SCCM boundary group.
I want to deploy a DP to each physical location...
Hi,
I have pull DP and some of the packages are failing with this massage.
Package Transfer Manager failed to update the package "xxxx05", Version 1 on pull distribution point Pull.DP.COM. This pull distribution point has no sources from which it can download content. We will try again later...
Hello guys,
After installing SCCM update 2107, some clients have been unable to download/install apps from Software Center or in required mode via VPN connection.
I have checked the boundaries and such, everything seems to be OK. I have also noticed that the problem occurs whith the new version...
Hello everyone,
I added recently a new Distribution Point after configuration the default client package with the ID [Site_Code]00002 distribution hangs at in progress status,
and in the detailed window, I found the following statement " Distribution Manager successfully processed the...
Hi, I've just succeeded to install my sccm and make my PXE work but for some reason my Configuration Manager Package cannot be located on distribution point. I also found out that I probably need boundaries but I don't know how to add them. Please Help if possible thank you
Hi,
I have been using SCCM for a good 5 years without issues, and all of a sudden contents stops distributing. The only way to get it to distribute again is to restart the SMS_Executive component. After a while content will stop distributing and i have to restart the SMS_Executive service...
Hello,
I have a strange problem with my newly created Distribution Point.
I wanted to use them for low bandwidth sites and therefore I want them to always respond to PXE requests. This worked fine so far, the bootimage is taken from the DP and not from the Siteserver.
Unfortunately after the...
Hello all,
i have the issue that i cant upload a custom boot image to one of the DPs although it was possible on the others.
Attached the smspxe log from the DP where it didnt worked.
Any help much appreciated
Hi,
I've a bit of a problem with my company SCCM setup.
We have SCCM fully running in our OFFICE domain - running PKI and all is fine.
Now, we need to also manage clients in our MFG domain, which is not running PKI.
This domain is totally separate, but there is a full two-trust between them...
I am about fed up
We upgraded to Server 2016 from 2012 and SCCM 1902 from 2012R2
I can distribute updates to distribution point and drivers but when I distribute Boot image and Config Manager Client Package I get the following error in the PkgXferMgr log.
CContentDefinition::TotalFileSizes...
Good day all,
I am a relative SCCM noob and I am in the process of creating a SCCM home lab of which the specs are below;
1 4 core 16 gb ram server running 2012 r2 (to be the same as at work) called GagaSccm, domain joined, static IP, IIS installed, DHCP installed and configured
SQL Server...
Hi Everybody
I've reviewed other posts about this "failed to get dp locations as the expected version from mp" problem and it seems that i have different issue since they haven't solved mine.
I Checked twice my Boundary and Boundary Group Configuration and also my DNS is working properly.
I have...
Hi,
I thank you for your work.
I have a question for which I have never found a solution.
Here's my problem:
I have a DP Groups (let's call it LABHTTPS) containing 2 DP FIL00 and FIL01.
All apps / boot images / packages are deployed to LABHTTPS.
FIL00 dies unexpectedly. I remove it from SCCM...
Hi All,
I'm installing a new SCCM setup and am running into an issue:
For some reason I'm unable to install the DP role?!
Normally I would start digging the log files, but there are no logs in C:\Program Files\SMS_CCM\Logs that relate to DP*
IIS is not showing anything but "Default Website"...
Hi,
So, I am having some problems with the remote DP, I have deleted and recreated the site, even gone as far as deleting the VM and building a new server. I configured the required DHCP options on the DHCP scope for testing and that didn't work either, this is now removed. When booting a laptop...
Hi There,
I created a DP that also has the PXE role installed. I am able to pxe boot from this server, however I am unable to get any clients to download content from it. It is not a boundary issue because I have added the same boundary to another DP and I am able to download content from them...